How To Install Outdoor Floodlights

Installing outdoor floodlights is not as easy as installing indoor overhead lighting, but it’s worth the effort. You’ll need to make sure your home has enough power supply and a way of connecting them to the grid in order for them to work properly.

The “how to install junction box for flood light” is a step-by-step guide on how to install outdoor flood lights. The article also includes information on the types of junction boxes that can be used, and what type of wire should be used.

Related Post: Best Table Saws


Floodlights have become a common household appliance, whether for safety, functional illumination, or just showing the outside of your home at night.

Floodlights used to be difficult to install without the help of a professional, but they are now a rather straightforward DIY endeavor. The installation procedure is straightforward and straightforward, but how do you go about doing it?

This article will walk you through the simple process of installing outdoor floodlights. While it is a straightforward procedure, you must ensure that your floodlights are installed appropriately.


Contents Table of Contents

  • Choose a location for your flood lights.
  • Turn off the light.
  • Flood lights should be installed.
  • Examine your floodlights
  • Takeaway


Choose a location for your flood lights.

As previously said, floodlights may be utilized in a variety of situations, thus the place where they are installed must be considered. Installing your floodlights near a power source whose circuit you can quickly reach for connecting the lights is advised. 

If you have a location in mind but don’t have any electrical outlets, an electrician may install them for you and you can continue with the project. 

Location  Benefits
Above the main entrance Maintain a well-lit entryway for guests. Safety benefits from increased visibility.
The garage is located above. From the interior of a car, there is more visibility.
Above the windows are With the addition of outdoor lighting, the look has been improved.
Any additional structures outside (barns, garages, workshops) Added safety

Regardless of where you want to put your floodlights, make sure the precise location is high enough for the floodlights to cover as much terrain as possible. 

Floodlights are designed to deliver bright light, therefore placing them high up will not obscure their purpose. A floodlight’s performance improves when it is put higher up. We go through how to connect lights to vinyl sliding here if you want to put some lights to the side of your home.


Turn off the light.

Before actually beginning the installation process, it is extremely important to Turn off the light.. Any exposed wires with current running through them during installation can pose a major risk of injury. Not following specific, simple safety instructions will likely end up causing consequences.

Turning off all electricity inside and outside your home may not be essential. Turn off the circuit you’ll be working with during installation at your circuit breaker box. 

Of course, if you want to be extra careful, and because this procedure is quick, it wouldn’t hurt to turn off the main switch on your breaker box. The more precautionary actions that are taken, the better. 

Turning off all of the electricity is the best way to proceed if you’re working in a house with outdated wiring. It’ll only be for a short time, so taking additional precautions is worthwhile. 

It is recommended that you test the circuit with which you will be working, regardless of what you choose to perform. If you have a circuit tester, you can ensure sure there is no electrical current flowing through the circuit. Also, be sure to read our post on how to power your Christmas lights.

Flood lights should be installed.

The big event follows, which is the actual installation of your floodlights. This is the most difficult portion of the procedure, but it should be simple if you follow the directions attentively. During the actual installation procedure, you will most likely encounter two situations:

  • Floodlights are being installed in the place of a former light fixture.
  • Floodlights are being installed in a new region.

If you’re interested in hanging string lights without utilizing trees, we have an article that goes through a few alternative methods to do it.

Using New Flood Lights to Replace an Old Fixture

The installation procedure is a little easier if you’re replacing two light fixtures. These steps will assist you in completing the task:

  • You’ll need to start by removing the existing light fixture. Unscrew the light bulbs in the fixture you’re removing after making sure the circuit’s power has been turned off. 
  • After gently putting them aside, unscrew the whole light fixture, unhook it from the wall, and remove the wires that are linked to it.
  • Continue to the following section if you are certain that the circuit is turned off. However, since safety is the most important factor here, it wouldn’t hurt to double-check with a circuit tester if you have one.
  • The mounting strap of your new floodlight fixture is in position after the whole prior light fixture has been removed. However, before you screw in the fixture, you must first connect the wires. 
  • The wires in the circuit in the wall should be the same color as the cables coming from your new flood light fixture.
  • Twisting the ends of the circuit wires and the lighting fixture together is the simplest method to connect them. 
  • After that, use electrical tape, wire connectors, or both to secure the connection. Any electrical wire connection should be secured with as much material as feasible.
  • After the cables have been connected, the remainder of the installation is simple: secure the floodlight fixture to its mounting strap, then secure the light bulbs in their designated placements. You should be able to use your new floodlights immediately after re-energizing the circuit.

Flood Lighting In A New Location

Installing outdoor floodlights in a new location is comparable to replacing an existing fixture, but there are a few subtle changes that may lengthen the procedure.

Right now, the most popular stories are

How to Hang String Lights in a Backyard Without Trees: 7 Methods

Is a Hot Tub Safe to Use on Gravel? (And Why You Should Use It)

Squirrels in the Backyard: What to Feed Them


  • After determining where your floodlights will be installed, drill holes in your home for the floodlight fixture to be installed using screws. 
  • Because the wire connection procedure may take the longest, locate a circuit and junction box near your installation place.
  • If you’re replacing an old fixture, the wires will be there in front of you when you remove it, as you undoubtedly already know. 
  • If you’ve selected a new location for your new flood light fixture, you’ll need to run the wires to a nearby junction box where they may be connected to your circuit breaker. 
  • For your safety and convenience, it is strongly suggested that you utilize fish tape throughout this operation. A fish tape is a device that allows you to “fish” the wire to make it easier to attach to the junction box. 
  • The wiring procedure is the same as in the prior example after you’ve located the junction box. After you’ve finished wiring the fixture, you’ll connect the mount and screw in the fixture and light bulbs.

Examine your floodlights

You’ll want to double-check that your floodlights are working; otherwise, was all that expert electrical work worth it? Return to your circuit breaker box after installing your floodlights and re-energize the circuit. Then, turn on your floodlight switch and double-check that your floodlights are operational.

If you don’t observe any issues with your setup, you’re ready to go and may use your floodlights for any reason you choose. If you notice a problem, such as your floodlights not coming on at all, your best choice may be to contact a licensed electrician who can help you.


Floodlights are an excellent safety element to have installed in any house or structure. Thankfully, you can perform it yourself without the assistance of a professional. 

Installing outdoor flood lights is a straightforward process. All you need is:

  • Electrical wiring fundamentals 
  • A clear picture of where the lights will go
  • The required equipment, as well as, of course, floodlights 

It will be simple to install your flood light fixture if you follow the steps above and follow any extra instructions provided by the manufacturer. Also, if you’re uncertain about any aspect of the installation, it’s not a terrible idea to call a specialist.

Whether you’ve read the how-to instructions for installing floodlights on your own and aren’t sure if the work is within your capabilities, enlisting the assistance of someone who knows what they’re doing may be really advantageous.

Once your lights are installed, you may have bird problems and need to know how to keep birds away from your outdoor lights or how to reset the outdoor motion sensor on your lights.


The “how to install a floodlight on siding” is an article that discusses how to install outdoor floodlights. The article includes pictures and diagrams for the reader’s convenience.

Frequently Asked Questions

How do you install an outdoor floodlight?

A: To install an outdoor floodlight, you will need to find the best spot in your yard where it can project a light beam. From there, you would be able to mount it on concrete or any other sturdy surface.

What do I need to install a floodlight?

A: A floodlight is a light that emits more than just one color, but it does not emit white. You can buy them in places like Home Depot or Lowes and they are relatively inexpensive

How do I install floodlight without existing wire?

A: The quickest way to install Floodlight is to use a wire.

  • installing outdoor flood lights under eaves
  • how to wire a floodlight to an existing outlet
  • flood light mounting box
  • flood light installation near me
  • flood light wiring diagram
You May Also Like