Keeping your outdoor fountain clean is essential to maintaining its beauty and functionality. If you want to keep the water flowing without wasting time cleaning, make sure that you have one of these three things on hand: dish soap, a bottle brush, or a small spray nozzle.
The “how to keep fountain water clean naturally” is a question that has been asked many times. There are some easy ways to keep your fountain water clean and fresh. The best way is to use a filter or pump.
Many yards have fountains as the focal point, but they may be difficult to maintain in an outdoor environment. Dirty water might cover them with muck, destroying the piece’s overall mood. Furthermore, while attempting to obtain useful information to remedy this issue, the internet may be a complicated place.
I’ve put up a handy guide for you to utilize with your fountain below. You’ll be able to maintain your outdoor showpiece gleaming and ready for guests at all times if you follow these easy instructions on a regular basis.
Contents Table of Contents
- Before doing any maintenance on the fountain, turn it off.
- Remove the water from the fountain and dispose of it.
- Clean up the Fountain
- Check for clogs in the pump.
- Fill the bottle with distilled water.
- Completely submerge the pump in water.
- Keep the water clean to keep the fountain clean.
- Pump Replacement
- Rep the procedure.
Contents
Before doing any maintenance on the fountain, turn it off.
The first step is to switch off your fountain’s water pump. This is necessary to prevent water from spraying everywhere when you begin cleaning. This pump, as well as any other tiny ornamental things you may have inside, must be removed.
Remove the water from the fountain and dispose of it.
The fountain must then be emptied. After all, going back to the beginning is the simplest method to keep your water crystal pure. A clean slate means you may take all the required steps to guarantee safe, long-lasting water.
Taking Out the Water
Algae and other debris are more likely to grow up and stay in the vessel if unclean water is allowed to dwell within.
Emptying the water from a fountain is a simple task that may be accomplished in one of many ways:
- Unplugging the fountain entails removing the plug at the base and enabling drainage.
- Bucket by bucket: removing the water with a little bucket.
- Water siphoning: Using a short piece of tubing, siphon water to the ground.
You should be able to see the grit and filth left in the base after you’ve finished this step. In the following stage, we’ll look at removing this.
Clean up the Fountain
After that, we must get rid of any residual extra. The following are some of the most prevalent ways of dirt/algae removal:
- a solution of household bleach and fountain water
- a stiff sponge, water, and a regular dish soap
- Cleaner for fountains (make sure it works for copper fountains)
- Cleaner for stainless steel (for stainless steel fountains)
You may also use a sponge to clean any excess ornamental pieces to ensure that they don’t have any invasive algae or dirt that might hinder your progress.
You should be able to inspect every section of the fountain after the water has been drained and it has been cleaned. It is now safe for you to proceed to the next stage.
Check for clogs in the pump.
Dirt, leaves, and other natural detritus that come with an outdoor site sometimes block water pumps. As a result of the inadequate water circulation, the liquid becomes a gorgeous colour of brownish-green.
Cleaning the pump using a tiny washcloth or towel is a simple option. This should be done on a regular basis to minimize calcium accumulation and allow free flow of water. However, there are situations when there is more to it. A natural obstruction might be the problem.
Blockages may occur from a variety of sources, including:
- Leaves: They may clog the pump, no matter how big or little they are.
- Dirt: This usually collects near the fountain’s base.
- Rocks: They might be little or enormous.
- Wrappers, paper towels, and plastic bags are examples of household waste.
You can take these things out by hand, but if there seems to be an impediment deep within, it’s probably preferable to clean it using a homemade solution. This will clear the path for optimal water circulation by removing any inaccessible impediments.
The following are some options for clearing a blockage:
- White vinegar: This dissolves undesirable buildup rapidly.
- Water and soap: Use the same approach as vinegar, but with less strength.
Both of these products may be used with a toothbrush, allowing you to reach the deepest sections of the pump without difficulty. Pipe cleaners may also be used.
Fill the bottle with distilled water.
Distilled water is the finest choice for your fountain. Because it’s clean water, this method works best. Because the pump has an easier time pushing it through, it will last longer and clean your water for a longer period of time.
Distilled water is available at almost every grocery shop, petrol station, and hardware store. It’s inexpensive and will maintain your fountain in tip-top form.
Right now, the most popular stories are
How to Hang String Lights in a Backyard Without Trees: 7 Methods
Is a Hot Tub Safe to Use on Gravel? (And Why You Should Use It)
Squirrels in the Backyard: What to Feed Them
Completely submerge the pump in water.
It’s time to refill your fountain with distilled water after you’ve located it. It’s critical to keep your pump covered with liquid so that water can flow. To make sure the pump is protected, do the following:
- Submerge the pump: Make sure the pump is completely immersed.
- It must be operational: It’s worth noting that the pump is sucking in water.
Your brand-new water is ready to start the circulation process after the pump is fully covered. Turn it on, and the fountain will flow as it did previously after a few seconds. This signifies that the pump is positioned correctly.
Keep the water clean to keep the fountain clean.
You should have a clear and dazzling centerpiece after the fountain is full. However, if the water is not properly cared for, it will become unclean again. You may also take some extra precautionary precautions.
Preventatives for Algae and Dirt
Many things are available for purchase online that may be utilized to prevent debris from contaminating your fountain water. Algaecide is a commonly used technique for preventing natural algae development in water. The following are some of the best-selling items on Amazon:
- FounTec Algaecide by EasyCare
- Fountain Guardian
- Algaecide and Clarifier Fountain
You can delay the emergence of the inevitable green and keep your fountain crystal pure for longer by utilizing this technique.
Make Use Of A Cover
You can Make Use Of A Cover, either made specifically for fountains or fashioned from a tarp, to keep unwanted items out of your fountain at night or in bad weather. Simply wrap it around your centerpiece tightly and remove it in the morning to minimize disturbance.
On Amazon, you can buy the following covers:
- Cover for the Sunnydaze Outdoor Fountain
- Fountain Cover by Covermates
- Weatherproof Cover by Bosmere
Regardless of the unforeseen, they will help maintain your fountain looking great.
Maintain the Flow of Water
Another crucial precaution is to keep your fountain running at all times, regardless of the time of day. Algae and other growths have less of a chance to stay and develop when the water is constantly moving. More information is available at wanderglobe.org.
Preventatives for Straining
You may avoid dirt accumulation by monitoring your water fountain on a regular basis and removing leaves and debris from the liquid’s surface. You may achieve so by using the following methods:
- A tiny pool strainer may be obtained at any hardware or pool shop in your area.
- A colander: A colander is a kind of strainer that is often used in the kitchen.
- Your hands: For removing larger things, your hands are generally the best option.
This little precaution goes a long way toward extending the life of the water pump. It’s crucial for the overall preservation of your focal point.
Pump Replacement
It’s critical to maintain your pump clean, but it’s also critical to replace it. Pumps usually last three to five years.
Rep the procedure.
Repeating this step once a month is perhaps the most critical prophylactic strategy. Checking on your fountain and water pump on a regular basis, washing the inside, and refilling the water can maintain the fountain in top shape.
In the long term, keeping an eye on your fountain will benefit you much. Treat it as if it were a live creature, and it will thrive. Check out our other cleaning articles, such as how to clean your dryer vents with a leaf blower, how to clean a hot tub that has been sitting, and how to clean a hot tub without emptying it.
The “how to keep water fountain from turning green” is a common problem. The best way to prevent this from happening is by using a clean, continuous stream of water.
Frequently Asked Questions
How do I keep my outdoor fountain water clear?
A: Unfortunately, outdoor fountains can be a hassle to take care of. There are two options that you have in order to keep your fountain water clean and clear at all times; filter the water or buy an automatic pump system.
Can I put vinegar in my water fountain?
A: At home, you should never put vinegar in your water fountain. However if you are going to be out of the house for a while and need clean drinking water, I would recommend getting bottled spring or filtered tap water from any grocery store.
How do I keep my outdoor fountain algae free?
A: To keep your outdoor fountain algae free, you should use an aquarium pump to filter the water. Brushing it with a net would be another option as well if you dont want to do something like this.
Related Tags
- how to keep fountain water clean and safe for pets
- how to keep fountain water clean for birds
- hydrogen peroxide for fountains
- fountain algae control vinegar
- vinegar in fountain water