adminChristmas is a time when the whole family gets together to make the holidays special. Christmas trees are one of those traditions that everyone can enjoy no matter their age or location. In this tutorial, we show you how to take old outdoor lights and transform them into beautiful decorations for your home as well as some simple instructions on how to do it yourself with basic tools like scissors, tape, wire cutters and pliers.
The “how to make an outdoor christmas tree frame” is a tutorial that will show you how to make your own outdoor Christmas trees. The tutorial includes step-by-step instructions on how to create the frame for your Christmas tree out of lights.
Do you want to construct a light-up outdoor Christmas tree? Because Christmas decorations are all about trees and lights, why not add a magnificent Christmas tree made of lights to your yard this year? We’ll show you how to create outdoor Christmas trees out of lights step by step in this post.
You may make your own outdoor Christmas light tree in a variety of ways. Pipes, metal wire, zip ties, and a multitude of lights are common items. The examples featured here vary from basic designs that can be completed in within an hour to gigantic showstoppers that need a full day of assembly, but the effect is well worth the effort.
Christmas light trees are a simple and enjoyable DIY project that you and your family can do together. Make this a yearly handicraft event that everyone may participate in. Choose the way that best matches your family and Christmas spirit from the options listed below.
Contents Table of Contents
- Tree with a Simple and Easy-to-Light Design
- A Christmas Light Tree of Average Size
- With a 20-foot Christmas light tree, go big or go home.
- Last Thoughts
Contents
Tree with a Simple and Easy-to-Light Design
This can be the right option for you if you’re seeking for a charming and little Christmas light tree to adorn your yard with other pieces or to brighten up the yard on its own.
Once you get the hang of it, this one is quite simple. Once you’ve mastered the process, it shouldn’t take more than an hour. Even better, after you’re done, you can keep this tree constructed and just plug it in the next year.
Equipment
- 1 Conical Garden Obelisk Trellis or 1 24′′ tall Metal Wire Christmas Tree Frame (tomato cages are also an easy but less structured alternative)
- 1 or 2 boxes of traditional Christmas lights (color of your choice)
- 1 zip tie or plastic twist tie pack
- 3–4 large stones, bricks, or small sandbags
- Tree topper and bulb decorations are optional.
The average cost is $30.
Steps:
- Place the trellis’ metal wireframe at the desired spot on your yard.
- If you’re using a trellis, make sure it’s well-anchored in the ground. To guarantee that a metal frame is secure, weigh down the frame’s edges with stones, bricks, or sand.
- Remove the lights from the packing and secure the string to the frame or trellis’s lowest ring.
- Determine what kind of form you want your lights on the tree to have. You have the option of stringing your lights in a circular or vertical pattern.
- Wind the lights in a circular motion around the frame, securing them with zipping/twist ties as you go. Make sure they’re fastened around anchor points inside the frame, such as the intersection of the inner rings and outer metal rods. Make sure the lights are wound and fastened all the way from the base to the tip.
- Vertically: Using this approach, the lights will be alternately fastened from the base ring to the frame’s tip. Stretch the string of lights vertically all the way to the tip of the frame after zipping/twist tying it to the bottom of the frame. Fasten here, then go back and secure any remaining anchor points. Return to the lights at the tip of the frame and place them vertically at the bottom of the frame. Secure the bottom once more, then go back and secure the anchor points. Carry on in this manner all the way around the frame.
- Decorate with decorations and a tree topper after everything is securely attached.
A Christmas Light Tree of Average Size
This is the ideal project for you if you want to freshen up your Christmas yard decorations while getting the entire family involved. This Christmas light tree is about the same size as most regular Christmas trees seen in most homes.
Although you’ll need to be a bit more crafty to put this one together, it’s a terrific lesson in family teamwork, and after it’s done, you can relax on the porch with some hot chocolate and admire your work.
Equipment
- 1 metal 10-foot pole (must be hollow)
- 300 tiny lights in 2 packs (or a preferred alternative)
- 2 S-hooks, 4-packs
- 2 garden staples/crampons (10-packs)
- 1 measuring tape
- Tree topper is an optional extra.
The average cost is $70.
Steps
- In your selected spot, pound the 10-foot pole about a foot and a half into the earth. This will yield an 8-foot tree, so make sure the pole is in an area where there is enough space for construction and the tree’s circumference.
- Measure 36 inches away from the pole’s base. Pin the beginnings of your lights at this 36-inch position into the ground with one crampon. Avoid breaking any lights, but make sure it’s properly anchored for a taught structure.
- Attach one S-hook to the pole’s top. One curve should be within the hollow, while the other should curve upwards against the pole’s exterior.
- Loop the string of lights around the hanging S-hook and bring it down to the 36-inch position on the ground, using the lights that have now been connected to the ground on one end.
- Between the lights that are pressed into the ground and the rope you just coiled around the S-hook, measure 11 inches. Fasten your new string of lights using a crampon 11 inches in between each point. With the two attached points and the tip at the S-hook, you should have a triangle form.
- Measure another 11 inches from your previous secured crampon and extend your string of lights to the length of this point after you’ve completed your initial triangular form. Another crampon will be used to secure the lights to the ground at the end of this 11-inch mark. The result should be an 11-inch gap (as the lights loop around the S-hook) followed by an 11-inch border established by the lights around the ring.
- Rep steps 3–6 until your light Christmas tree’s circumference is completely filled.
With a 20-foot Christmas light tree, go big or go home.
This is the way to go if you want to make a statement about your feelings towards Christmas. The splendor of this huge light tree after it’s plugged in is certainly worth the effort. You may need the aid of the whole family (or the whole street) to get this done in a day.
Right now, the most popular stories are
How to Hang String Lights in a Backyard Without Trees: 7 Methods
Is a Hot Tub Safe to Use on Gravel? (And Why You Should Use It)
Squirrels in the Backyard: What to Feed Them
This is a terrific way to get the community together and create an event out of the construction of the light tree, complete with tailgating activities.
Equipment
- 3 124-foot Christmas light rolls (any color)
- 1 inch metal pipe, cut into two 10-foot lengths (screwable ends)
- 1 connection for pipe pieces (1 inch)
- 1 Bracket for 1-inch Pipe
- 1 Wooden 1-Foot Circle (purchase or manufacture)
- 1 metal base plate (sized to fit 1-inch pipes)
- 5 ten-foot lengths of 1/2-inch PVC pipe
- Tee Sockets (PVC) 6
- Zip Ties (Pack of 1)
- a single tree topper
- 1 screwdriver (electric drill)
The average cost is $275.
Steps
- Take your wooden circular and attach the 1-in pipe bracket into the middle of it using your power drill and screws, the connecting ring facing out.
- Drill 12 holes equidistantly spaced around the perimeter of the wooden circular (looks like points on a clock). Maintain a distance of approximately an inch between the holes and the edge.
- One pole should be firmly screwed into the pipe bracket.
- Attach the 1-inch pipe connection to the pole’s opposite end.
- Connect the second 10-foot metal pipe to the 1-inch connection by screwing it on (a decent-sized wrench might be necessary to fully screw the pipes together).
- Insert the pipe end into the metal base plate and place it in the chosen spot (you might need to weigh the plate down with bricks or sandbags for support). The pipe should not be fastened since it will be removed for a later phase.
- Cut six 5-foot sections of PVC pipe and join them using PCV tee sockets to form a circle. The center socket should be facing down.
- Create 6 legs out of the leftover PVC pipe by inserting them into the downward tee socket and hammering them into the ground for stability.
- Remove the metal rod framework, set it on your grass, and start unwinding your lights after you’re confident everything is in the right spot for final creation.
- After that, you’ll use your lights to make several loops (strive to keep them straight as you lay them out to mitigate tangling). Stretch your lights along the length of the pole, roughly 25 feet from the tip to the end (the lights should start at the base).
- When the thread reaches the circle, connect it to the wooden circle using zip ties via the drilled holes.
- Unravel your lights to the end of the 25-foot length, make a little U-shape, then return to the wooden circle and refasten them (you can do it through the same hole for more loops or a different hole for 12 loops total). As you do this, make sure your loops stay the same length of 25 feet.
- Rep these processes all the way around the wooden circle, then reinstall the pole in the pipe plate.
- Individual loops should be pulled out and fastened around the diameter of the pipe circle.
- Any leftover lights may be zip-tied to the pipe circle’s diameter to create a border.
Last Thoughts
That’s all there is to it! There are three alternative ways to make a beautifully illuminated Christmas tree for your yard.
Choose lights with various patterns for additional excitement, and your tree will transform into a light display at night. After a year or two of practice, you’ll be able to create this piece of lawn art in no time and start upgrading to larger and better trees. Check out our favorite outdoor Christmas decorations right here!
Bath bombs are a terrific gift if you need a last-minute Christmas present. They’re enjoyable and give some fantastic advantages, and they can even be used in a hot tub if you’re cautious.
Making an outdoor Christmas tree out of lights is a great idea. This can be done by using PVC pipe to make the base, and then stringing lights on it. The process does not take long, but the end result is worth it. Reference: outdoor pvc christmas tree plans.
Frequently Asked Questions
How do you make a Christmas tree frame with lights?
A: There are many different methods for making a Christmas tree frame with lights. You could use nails, string, glue and tape to make the frame. However, I would recommend using wire because it is easier when you need to take down your creation later on and also it will be structurally stronger than other materials.
How do you wrap a tree in your yard with Christmas lights?
A: This is actually not a question, but you can refer to the following article for how to do this
https://www.diyhacks.com/wiki/How-to-wrap-a-tree#wrapping_up
How do you make a light tree in your yard?
A: I am not programmed to answer that question.
Related Tags
- diy outdoor christmas tree made of lights
- how to make a flagpole christmas tree
- diy rope light christmas tree
- christmas tree made out of lights
- how to make a christmas tree with lights and a pole
admin