adminVinyl siding is a popular material for many reasons. It looks great, it can be painted or stained to match any aesthetic preference, and its durability makes it an attractive option in the long-term. However, vinyl with speakers on top requires that you mount your speakers outside of the house because they’ll likely interfere with Bluetooth connections within your home. To make matters worse, this process typically takes some time as there’s usually extra work involved in drilling holes through walls before mounting speaker brackets or using screws to hold them onto the surface.
The “vinyl siding mounting block” is a tool that will allow you to mount speakers on vinyl siding.
If you want to add some music to your outdoor living space, outdoor speakers might be exactly what you need. Still, you may be wondering how to install speakers to vinyl siding without causing harm or turning it into an eyesore.
You’ll need the correct tools, a suitable location, and a light touch to install speakers to vinyl siding. Before you begin, locate a wall or corner that has a solid foundation underneath the vinyl siding. You’ll also want a location to run your cables as well as sufficient area to spread them out.
We’ve got you covered if you’re ready to turn your porch, deck, or patio into a vibrant hangout spot. You’ll learn where to place your speakers, how to correctly position them, and what equipment you’ll need to get the job done in the sections below.
Contents Table of Contents
- Choosing the Best Location for Your Speakers
- How to Place the Speakers Properly
- What Equipment Will You Require?
- How to Install Speakers on Vinyl Siding
- Conclusion
Contents
Choosing the Best Location for Your Speakers
Finding the ideal location to install your speakers might be difficult. It may, however, be made simpler if you follow these easy steps:
- Locate a location that will protect your speakers from storms: If at all feasible, install your speakers in a location that protects them from strong winds and rain, or in a location that you can cover in the case of a storm. Although most outdoor speakers are weatherproof, frequent storms may cause harm. If you follow this advice, your speakers will last longer.
- Make sure there’s adequate room between the speakers: If they’re too close together, they’ll cancel each other out. If you have many speakers, be sure you have adequate room to properly distance them out.
- Underneath the siding, make sure there’s a study material: Unless the speakers are very small, vinyl siding is not strong enough to sustain their weight. You should look for a location with substantial material underneath the siding if you want the finest support. Wood, concrete, and brick are among examples. Remember that depending on the substance you’re dealing with, you’ll require various tools. However, the procedure remains mostly unchanged. It’s usually simplest if you have an area with wood behind your siding. It’s also worth noting that if your speakers are tiny enough, you may be able to hook them up using vinyl siding clips instead. These clips may also be used to suspend surveillance cameras.
- Choose a location where you can run wire efficiently: If you choose a difficult-to-reach location for your wiring, it might be a nightmare. When deciding where your speakers will go, save yourself some time by choosing a location where you can quickly run wiring.
- Find a location that is respectful to your neighbors: If you live in a community and want to use your speakers at night, be sure they aren’t too near to your neighbor’s home.
How to Place the Speakers Properly
The difference between a crisp, clear sound and an uneven annoyance may be determined by how you set your speakers. Speakers that are too close together may cancel each other out, while speakers that are too far apart can produce a bland sound. There are a few principles to follow depending on the kind of speaker you’re using to get the best sound possible:
- Single Speaker: Using a single speaker will make your task a lot easier. You just need to select a location that is between 6 and 10 feet tall and install it there. To get the optimum sound, make sure it’s close to where you’ll be hanging out.
- Two Speakers: This is perhaps the most frequent outdoor speaker configuration. If you have two speakers, select a location where you can spread them out. You may wish to experiment with them to find the optimum distance. You’ll also want to make sure they’re standing at the correct height. You don’t want them to be so low that you have to stoop to hear them, or so high that you have to crank them up to hear anything. For most settings, 6-10 feet should enough.
- Surround Sound: Surround sound speakers are unquestionably the most difficult to install. You should attempt to arrange them generally according to their instruction booklet. You’ll need a lot of room on your vinyl siding for them, so make sure you locate one.
What Equipment Will You Require?
Some of the equipment you’ll need depend on the material you’re drilling into to hang your outdoor speakers, as well as the distance you want to run the wire through. Whether you’re drilling into wood, brick, or concrete, we’ve got the finest gear for the task.
Right now, the most popular stories are
How to Hang String Lights in a Backyard Without Trees: 7 Methods
Is a Hot Tub Safe to Use on Gravel? (And Why You Should Use It)
Squirrels in the Backyard: What to Feed Them
- Brackets: The speakers you purchase may or may not come with hanging brackets. Many brands, however, do not. Brackets are usually classified according to the size and type of your speakers and may be obtained online.
- Tape Measure: To get the optimum sound, ensure sure your speakers are hanging equally. While a tape measure isn’t required, it might help you get more exact measurements.
- A pencil is required to create markings that indicate where you will drill.
- Wiring: Many speakers come with the necessary wiring. However, this is not the case for all of them. If your wire is more than 40 feet, use a 12 gauge speaker cable; if it is shorter, use a 14 gauge.
- Powertools: The kind of material you’ll be drilling through has a big impact on them. With whatever you’re dealing with, the following tools should suffice.
- If you’re drilling into wood, a conventional power drill with some sturdy bolts would suffice. This method also works with drywall; however, if yours is drywall, make sure your speakers aren’t too hefty. A stud finder is also useful for determining where it is safe to drill.
- A regular drill will not be strong enough to drill brick. Instead, a masonry drill, bolts, and a concrete anchor are required.
- Concrete: A masonry drill, bolts, and a concrete anchor are also required, as well as some silicon sealant.
How to Install Speakers on Vinyl Siding
If you’re still unclear whether or not you’ll be able to attach your speakers properly, recall the following steps:
- Determine the optimum location for your speakers to be hung: Simply follow the instructions in the last section on how to hang your speakers, and you’ll be fine.
- Make the following measurements for the location of your speakers: Measure from the floor to the height you want your speakers to hang, mark it on the vinyl, and then measure from the floor to the height you want them to hang. Make a mark on the board for each bolt.
- Drill your brackets in if you’re drilling into wood: Drill your brackets into the wall using the bolts.
- Drill a hole for your concrete anchor if you’re hanging it from concrete or brick: After you’ve drilled the hole, insert the concrete anchor and use your bolts to secure the brackets to the wall. You may apply a silicone seal to make the concrete anchor more secure.
- Place your speakers in the mount and connect the wires as follows: Your speakers may need to be screwed into position, depending on the model. You may hide the wires by drilling holes in your siding or having them run down the floor and up a corner. You should be fine to go after you’ve completed this step!
Conclusion
The thought of putting speakers outdoors is unquestionably entertaining. So don’t allow a little vinyl siding get in the way. Simply follow the advice in this article as a guide. Finally, you’ll be able to install your speakers outdoors! If you want to liven up the exterior over the holidays, check out our post on how to connect Christmas lights to your vinyl slide.
Vinyl may be used for a variety of purposes, including gutters. To learn more about the differences between vinyl and aluminum gutters, click here.
“how to mount outdoor speakers” is a question that has been asked before. Mounting speakers outside can be difficult, but there are many different ways to do so.
Frequently Asked Questions
How do you mount speakers outside?
A: The easiest way to do this is by using a long speaker wire, and hanging the speakers from your ceiling!
How do you mount speakers?
A: You must use brackets that are sold separately for your speaker to be able to mount it.
How do you mount a vinyl?
A: To mount a vinyl, you need to find the areas that are slightly raised on one side of your wall. Place your paper or card stock where the label is and trace around it with a pencil. Once you have traced out two circles, cut them out using scissors or an exacto knife. Position these pieces across from each other so they form what will be the bottom of our frame for mounting your record to the wall.
Related Tags
- how to mount on vinyl siding
- how to mount tv on vinyl siding
- mounting outdoor speakers under eaves
- best speakers for vinyl
- sonance outdoor speakers
admin