Ryobi 2300 PSI Electric Pressure Washer [Review]

The Ryobi 2300 PSI Electric Pressure Washer is a high-performing tool that’s designed for various uses, from cleaning the exterior of your house to removing underarm stains. The product has received rave reviews in the marketplace and it comes at an affordable price point.

The “ryobi 2,300 psi pressure washer troubleshooting” is a review of the Ryobi 2300 PSI Electric Pressure Washer. The product is rated highly by consumers and has a lot of positive reviews.

Related Post: Best Table Saws

If you’re looking for an electric pressure washer, this post will go through our thoughts on the Ryobi 2,300 PSI 1.2 gallons per minute electric pressure washer.


I felt compelled to write a review for this product since I have always utilized gas pressure washers for all of my house tasks.

Decks, house siding/roof trim, fences, and concrete driveways have all been cleaned using pressure washers. You’re aware of the most typical pressure cleaning requirements. There are many alternatives to using a power washer to clean a fence.


I’ve never been compelled to get a specialized power washer since I only use it 3-4 times each year.

I also didn’t want to deal with maintaining another gas engine and having to take it to the mechanic every spring to have the old gas cleaned out of the carburetor.

I was fortunate in that I could borrow one from friends. A few of years ago, I opted to borrow a friend’s electric pressure washer, and it was a disaster. On the jet setting, the item had just a smidgeon more pressure than an ordinary hose. Until today, I had never used an electric pressure washer.


Over the late autumn and winter, I had seen mildew growing on my deck and knew I’d have to do something about it once the weather was beautiful enough to pressure wash it.

I began looking for decent buys after using a friend’s gas pressure washers the previous spring.


I decided it was past time for me to get my own. Some of the first reviews I came across included a highly recommended electric pressure washer.

I was still certain that an electric pressure washer could not possibly compare to a gas pressure washer, so I proceeded to look at gas versions. After additional research, I discovered that a lot of people were recommended this Ryobi 2300 psi electric pressure washer. I began to pay attention at this time.

I pushed further to read all of the reviews and figure out what was going on. The brushless motor was the first feature that piqued my interest. 



Motors with no brushes

I’ve been using Dewalt cordless drills with brushless motors, and they’ve worked well.

The brushless motor is more powerful than any of my prior cordless drills, plus it enables the battery to last longer.

Motors with no brushes have less moving parts to break down and are more efficient than regular brushed motors which gives them more power.

If you want to learn more about how a brushless motor in a pressure washer works, check out this article.

Pros and Cons of Induction vs. Universal Motors in Pressure Washers [FAQ014]

As I went through the various reviews, I noted it had a touch button start, and that, coupled with the fact that it was capable of 2300 psi, was what eventually convinced me to go check it out in the shop.

Most of the items I clean with my pressure washer and most other homeowners only need a bit more than 2000 psi.

I know I’ve ruined my deck boards in the past by breaking the wood fibers with a 15-degree nozzle on a gas pressure washer. There is a chart that shows the needed psi for the various pressure washer applications.

I went to the shop and purchased the unit, assuming I’d give it a try and then swap it for the gas model ryobi, which also had excellent ratings and an honda engine.

Right now, the most popular stories are

How to Hang String Lights in a Backyard Without Trees: 7 Methods

Is a Hot Tub Safe to Use on Gravel? (And Why You Should Use It)

Squirrels in the Backyard: What to Feed Them


I removed all of the chairs and other items off the deck and used my gas blower to remove all of the leaves.

I also scraped anything trapped between the deck planks with my 5-in-1 paint scraper. When I constructed my most recent deck, I made sure to leave enough space between the wet pressure treated boards to allow for a 1/4 gap after they dried.

I used to butt the deck boards together as other people suggested, but the gap after it dried was only about 1/8 of an inch, which is much too little if you had leaves or pine needles that fall on your deck.

When the space is too tiny, everything is trapped under the joist, which remains damp and rots the joist quicker. Larger spaces enable leaves and needles to fall between them, keeping the joists dry.

Sorry for the tangent, but it’s critical to maintain the space between your deck boards free of debris. I unboxed the pressure washer once I finished cleaning everything up.

It was simple to connect the hose to the nozzle and the machine after slipping the top handle section on. I put my mold and mildew cleaning to the storage container after connecting the water line.

The pressure washer comes with three different tips. For tough mildew, the blue nozzle was a soap nozzle that let you to immerse the deck with the cleaner/water mix.

It’s little more than a soaker nozzle with very little pressure. The second orange nozzle features a 15-degree angle for most pressure washing applications and a high psi to tackle even the toughest pressure cleaning jobs. A turbo nozzle is the third black nozzle. I haven’t tried it yet, so I can’t comment on its usefulness. Due of its very high pressure, that nozzle is best utilized on concrete or other hard surfaces that will not be damaged.

First and first, I should state that I was pleased with the mold armor cleaner and that I should have left it on the deck for a little longer before beginning the pressure washing process.

It was doing half the job, and I could have reduced my cleaning time in half if I had let it remain a little longer. The mildew on the painted wood planks was easily removed with the pressure of the 15-degree nozzle. It also helped to remove some of the loose paint from the boards where the mildew was severe.

In compared to last year’s deck cleaning using a ryobi gas pressure washer, I found the electric type to be faster and simpler. I didn’t shred any of the deck fibers as I did with the gas model a few of times.

Cranking Isn’t Necessary

Because I had to put more gas in and then find out why the gas model wouldn’t start again, it took me less time with the electric model. It took me 6-7 times with the pull crank to get it to run for more than 10 seconds before shutting off. It was very convenient to just press a button on the electric model, and it would run until I pressed the stop button. I can’t tell you how thrilled I was the first time I used the button; it was so simple that it nearly brought tears to my eyes. You can appreciate this minor victory if you’ve ever battled with a pull crank on any engine.

I didn’t have to be concerned about running out of gas and then having to restart the engine after filling it up. I didn’t have any gas leakage on me, which happens no matter how cautious I am while filling up any of my gas motors, and that’s all I smell until I can fully wash it off. Finally, compared to the gas type, it was considerably quieter, which I’m sure my neighbors enjoyed.

It thoroughly cleaned the deck and removed any mildew. I still have some rust stains, so I’ll have to figure out how to get rid of them, or I’ll simply repaint the deck. Last but not least, I’m looking forward to having fewer maintenance concerns with this system.

I won’t have to worry about any gas remaining in it spoiling and causing problems with gas motors. So far, I’ve given this pressure washer my highest recommendation and believe it’s a wonderful model for most households.


The “ryobi 2300 psi pressure washer accessories” is a powerful electric pressure washer that has an impressive 2,300 PSI. The power of the machine makes it a great option for cleaning large areas.

  • best electric pressure washer
  • ryobi electric pressure washer review
  • ryobi 2,300 psi 1.2 gpm high performance electric pressure washer
  • ryobi 2,300 psi pressure washer manual
  • ryobi 2300 psi pressure washer no pressure
You May Also Like